Guide's day off - Applegate wines @ Red Lily

Just a drive to the Applegate Valley is all it takes to see why a small river valley (tributary to the famous Rogue) tucked within Oregon’s Siskiyou Mountains is such a gem. It still maintains it’s rural feel even though it’s just a western step off the I-5 corridor, complete with vintage agriculture, one of our favorite local steelhead streams and a thriving group of vineyards and wineries.

Screen+Shot+2020-01-14+at+2.29.53+PM.jpg

As you begin to feel you’re in the middle of nowhere, just past one of the few public parks in the area, a small sign points the way to one of our favorite Applegate wineries, Red Lily, known for it’s spanish-style wines, specifically their Tempranillos.

I couldn't help pausing the car as we drove down the lane and over a small, single lane bridge spanning the Applegate river. Tasting room in sight ahead, perhaps there was a steelhead below?

The grounds, when you enter the winery are a pleasing combination of ranch style buildings, manicured lawns and picnic seating near the river where summer evenings and live music can be blissful.

We were greeted by an energetic trio of wine tenders who eagerly greeted us with warm smiles and a detail of their flights, bites and bottles.

Ashland wine tasting @ red lily vinyards

Keen to give their signature Red Lily flight a try, “a sampling of their Spanish inspired varietals” we ordered a pair and a tapas platter to share.

Outside the pitter patter of light winter rain bounced off the metal roofs contrasting the warm fire, rough wooden furniture and cozy atmosphere inside.

Our flights arrived (in test tubes how fun!) with a quick tutorial and info card. Much appreciated,  it’s fun to compare and contrast your palate.

In our flights, we added a fifth to taste, their best in class and featured wine, a 2014 Life of Riley Tempranillo (Best in Class at the 2018 Savor NorthWest Wine Competition).

Letting the specifics of our interpretation and others go, we thoroughly enjoyed each and every sample, choosing a glass of the 2014 Life of Riley for Bridget and the Lily Girl Rose Rose for Brandon.

Red Lily Wine tasting

But in all seriousness, Red Lily’s Rose was mentioned numerous times by our winetenders as a summer favorite where many evenings in the warmer months, they feature live music and a house Rose Mojito recipe that pulls folks in for miles and keeps them coming back for more. (We’ll definitely be back for those!)

After a stroll down to the river, we decided to take home a couple of bottles to enjoy later. Their award winning Tempranillo, to be enjoyed immediately and a Rose, to be kept Cold and ready for those not so distant warm and fuzzy summer evenings.

It’s fun to enjoy the Applegate for more then just it’s prized winter steelhead. We have a couple of months to enjoy the fishing here but a rear round opportunity to savor other fruits of the land.

Brandon Worthington presents @ Diablo Valley Fly Fisherman

Brandon Worthington presents “Fishing the seasons in the Mythical State of Jefferson" at Diablo Valley Fly Casters

Diablo Valley Fly Fisherman, Tuesday November 19th

The Gardens at Heather Farm, Camelia Room
1540 Marchbanks Drive, Walnut Creek


Join Brandon Worthington of Worthington Fly Fishing for a multimedia presentation to explore and learn about their seasonal approach to the best fly fishing opportunities in Far Northern California and Southern Oregon. He’ll emphasize strategies, tactics and timing for Summer and Winter Steelhead as well as endemic Redband Rainbows on the Rogue, Klamath, Umpqua and beyond.

Fly%2BFishing%2BKlamath%2BRiver

Dining out in Ashland, Oregon

 

Ashland, Oregon Dinning

Dining out in Ashland is a must when you come to town. Just a short stroll from any of the downtown hotels you can find a plethora of delightful options.

  • Pie + Vine

    House-made pasta, wood-fired pizzas, balanced wines, excellent service and outdoor seating. Need I say more? Absolutely, its just that good! Brandon gets the boar bolognese every time and theres never been leftovers.

  • Standing Stone Brewery

    Standing Stone not only has an elaborate choice of house brews and local wines but their delectable menu is sourced from local ingredients most coming from their own farm only 1 mile away from the brewery/restaurant in downtown Ashland.

  • Ostras!

    A touch of Spain in Ashland. This place has incredible tapas with excellent house drinks. Anything with their romesco sauce will leave you wanting to lick the plate clean.

  • Taquiera Picaro

    Mexican done right with an Ashland touch and an excellent margarita! Quick, delicious and even nutritious if you can resist their exquisite carnitas!

  • Louie’s

    Enjoy a meal and a beverage on Ashland Creek or order free delivery to your hotel room. Louie’s is great! We highly recommend their new bowls, nice and nutritious, makes for a marvelous meal.

Simple Steelhead Muddler

I think the more fishing we do, the more we learn the specifics matter less, and the general idea often gets the job done. That’s the deal with the classic Muddler minnow, especially for steelhead. It’s simple, impressionistic, and can be fished and tied in a variety of ways to best suit your local waters. Here’s how to tie a varient I use on my local Steelhead waters, fished up top or with a tip on the swing.

Have fun!

Brandon

Step 1: Gather materials

Steelhead fly tying materials

-Dark Deer Hair, Diamond Braid, thread wax, maribou (any color, this one uses burnt orange) Steelhead hook. Note: If you plan to fish this on the surface, consider a lighter guage hook. Use heavy thread for this tie, I like Veevus 140.

Step 2: Snip a small clump of hair for the tail and tie in at the point of the hook below, allow it to extend past the bend of the hook a bit. Tie in several inches of Diamond braid. You will palmer this towards the eye to make the body next…

Tye in deer hair

Step 3: Palmer the diamond braid up the body to the return of the eye and tie off.

Deer hair tied in

Step 4: Tie in a small clump of Maribou even with the tail, then tie in a small clump of deer hair over the top of the bou’ for an over wing. Less is more here …

Maribou and hair died in

Step 5: Leave enough room here for a generous amount of spun deer hair for the collar and head.

Grab a liberal hank of deer hair…

spinning deer hair

Step 6: Spin the deer hair. Wrap lightly around the shank and hair once, softly, then continue a second wrap, slightly more pressure. Third wrap, harder still allowing the hair to spin around the shank of the hook and the thread to tighten up. Continue tension for a 4th wrap through the hair until the thread is clear of the hair.

Steelhead Muddler hair flair
Steelhead Muddler head

Step 7: Trim hair. This is where you decide how you want the head to look. Leave a lot of hair and this thing will push a ton of water, but a tighter trimmed head casts easier. Either way, trim up the butts with your scissors and admire the result. Then, tie one on and let er’ rip!

Happy tying,

Brandon

Brandons Steelhead Muddler

Take your grandkids fishing

Southern Oregon Steelheading is heating up and this week Spencer experienced what it’s all about on his first fishing trip to the Rogue River with his Grandpa Gordon. Fly Fishing creates memories that last a life time, and Spencer’s first Steelhead is one he’ll never forget!

Rogue Summer Steelhead Fly Fishing

Summer Steelhead on the Rogue River run July-December with famous Fly-Only Regulations September 1st-October 31st.

The Upper Rogue River offers a wide variety of enticing Steelhead water that lends it’s-self to a variety of fishing tactics and the steelhead here can be taken with both dead drifted and swung fly approaches. We love swinging for these fish with two handed rods while wading, though drift fishing from a driftboat is also extremely effective.

Drop us a line to experience one of the West’s best steelhead fly fishing destinations!

A Few Favorites from 2018

What a year!

We had memorable fish, the best company and great river conditions as a daily theme. As we turn the page on 2018 and into 2019 we’re looking back on some of our favorite shots and moments from another year on the river.

It was and will continue to be simply amazing out there. Thank you and cheers to 2019!

Rogue River Summer Steelhead on the swing during Fly-Only!
Williamson River Fly Fishing Guide
Rogue River Salmon Fly Hatch Fly Fishing
Oregon Klamath Redband Trout Fly Fishing
Klamath River Steelhead Fly Fishing
Rogue River Cutthroat Fly Fishing Guide
Wild Rogue River Summer Steelhead Fly Fishing Guide
September Steelhead Fly Fishing the Rogue River
Klamath River Steelhead Fly Fishing Girl
Wild Klamath Steelhead Spey Fishing
Umpqua Steelhead Fly Fishing

Patagonia Foot Tractor Boot Review

Guides complete boot review (Generation 1)

Foot Tractor durability

What makes a good wading boot?

It’s really easy to overlook the importance of the wading boot to your fishing program, even though we (I) expect them to perform for me day in and day out, on the water and off, and without a second thought. Your wading boot is there for you, every time you go fishing. Every trail, river, fly change, grip n grin, those boots were on your feet, humbly plodding along, indispensable, foundational to the experience. So yes, your wading boots matter!

Over the years I’ve had and owned and fished in a number of different brands wading boots, (Simms, Korkers, Chota, Orivis, Patagonia) including multiple traction options; rubber, felt, rubber with studs, felt with studs and felt with lots and lots of studs. I could go into detail on all the options out there, but this review isn’t a shootout, more the story of what hundreds of days of serious use will do to a wading boot that never gets to dry out and is repeatedly pushed to it’s wear out point.

Original Foot Tractor goes to AK

I bought my first pair of Patagonia River Tractor boots before heading up to Alaska. At the time I had been guiding in the Simms Guide Boot with felt and studs. In Alaska, felt is not allowed, so I needed a rubber alternative. Alas, Simms was out of my size in rubber when I went to order, triggering me down the Patagonia path which I am still on. It’s been 3 years of foot tractor use, and now I’m three pairs deep.

Foot Tractor Alaska

In the low gradient cobble of AK’s grayling streams I was immovable and felt super solid in the generation 1 boot. Snow didn’t stick to the rubber/aluminum bottom when hiking frozen trails and the aluminum bars bit into the rocks extremely well. They were a little heavier then I was used to, but oh so sticky to the river and trail. The boot was roomy, a little padded, and laced up easily and comfortably.

AK conclusion? Perfect boot.

Fly Fishing the Oregon Klamath River requires sturdy wading boots for precarious wades

Foot Tractor Boot in Oregon & California

Southern Oregon and Northern California, a super diverse landscape with equally diverse rivers was ultimately a much more appropriate test of overall durability and performance. Here we wade on all sorts of bedrock, cobble, lava, marbly shit, serpentine, trails to the river, you name it. Most of its hard, a lot of it has deep consequences of loosing traction can be bad.

 The gold standard on my home waters is usually a felt boot with about three rounds of Simms studs. Once the first 10 studs wear out, I’d stick another round in. Continue that process with studs every few months and you maintain great traction, but a puck of studs is like $30 bucks? Factor that into your purchase price.

Aluminum Bars

The metal bars are screwed into the Patagonia boot sole, which is a serious plus in my opinion, In my experience, the metal bars lasted about as long as the boot itself, so no extra studs, extra cost, or loss of traction down the line. Good idea!

The saw tooth edge of the bar does indeed find a few more nooks and crannies for purchase then a set of studs, and the soft aluminum bites on just about every surface. I say just about every surface because there are a few river bottoms that have just the right level of slime and slick rock that even these edges fail to purchase on. No boot is perfect. Also, get used to leaving some shiny aluminum on the rocks, especially if they are new. The way the aluminum works is it’s softer then the rocks, and kinda molds to the surface you are wading on.

Foot Tractor Durability

I barely noticed any wear or decrease in gripping performance for the first 60 or so river days. Most were a mix of Upper Sac and Klamath walk and wades, but also quite a few on smooth cobble rivers of AK. At about 100 days or so I had my first lace fray and the beginnings of the deterioration of the boot. After replacing the laces, they performed exceptionally well for another month of daily use before I began to notice the bars were quite flat, the seams were getting weak and I felt a little less then rock solid in the water.

Patagonia Foot Tractor Boot Worn Out

Next the rand of the boot begin to split and separate after what looks like the stitching had enough abrasion to finally loosen its grip on the upper.

Conclusion

Ultimately, I wore these boots for near 100 river days of hard use, with few exceptions in use intensity. They also rarely got a chance to dry out. In all, the soft aluminum bars gripped most surfaces very well and provided more than enough purchase to feel secure.  The fit is roomy and the laces provide a great custom fit. They’re comfortable for all day use and the design and durability are good enough for most people. Personally, I was a little disappointed in longevity, and I feel a boot like this should have held up about 20% longer than it did. I have decided to give another pair a shot because I’m pretty satisfied with them overall. I’m hopeful this new pair lasts and I’ll make an edit sometime next year with the verdict.

Boot 2 Conclusion!

I replaced my first pair in winter and ran a full winter, spring and early summer of guiding. I enjoyed all of the features listed above, but near the end of their life, had literally the exact same failures as the first pair, at around the same time. A good boot, but I’m looking at what’s new on the horizon

Danner/Patagonia Foot Tractor Review

BIG NEWS! Patagonia teamed up with Danner to to make the last boot I’ll ever need! It’s $500 bones but if I can get a couple hundred day so use, cost per use will be the same of less, so there’s the value! And, if they last twice as long, that’s one less thing I need to buy to clutter up the world. Sounds like a win win!

Click here for an update on the new Foot Tractor Danner Boot!

Patagonia Foot Tractor wading boot aluminum bars before and after 150 days on the water

 Happy Wading!

 Brandon Worthington

Holiday Gift Guide for the Fly Fisher

Are you looking for a gift for a fly fishing friend or loved one?  We've got you covered with this Holiday Gift Guide for the Fly Fisher! Abel Nippers and Lanyard; anytime Brandon is on the water, this combo is around his neck.  These nippers and lanyard have lasted many a season and have many more left in them!  Ours came from The Ashland Fly Shop, thanks guys!
 
Reeds Rod Wraps; these rod wraps help keep the rod organized for temporary storage (i.e. in the car) and are a great stocking stuffer for your favorite spey or single hand caster!
 
Patagonia Sunshade Hoody; this shirt is the BEST for sun protection in the summer and doubles as the perfect baselayer in the fall and winter.  Available in both men's and women's, we couldn't recommend this shirt enough.
M's Tropic Comfort Hoody II, Dam Blue (DABL)
 
Dr Slick Mitten Clamp; winter is upon us, the water is cold and absolutely no one wants to have to take their mitten or glove off to fit their fingers in the standard scissor clamp.  So we recommend the mitten clamp that functions great and allows your fingers to stay warm in-between the chromers.
 
Jefferson Fly Rod; we love supporting local, small businesses and we are fortunate enough to have an incredible rod company that is based out of White City, OR just minutes from the Rogue.  The Jefferson Rod Co. makes exquisite single-hand and two-handed rods which we use almost exclusively.  Brandon's favorite (at the moment) are a 1266-4 Spey Rod for two-hand casting and the 966-4 when guiding out of the driftboat.
 
Simms Wading Staff and Retractor; let's be honest, we have all wobbled our way through riffles or deep pools that we probably shouldn't have, sometimes we get lucky and other times we flood our waders or twist a knee; that's why we encourage the use of a Simms Wading Staff with Retractor, the quick release allows you to pull it out and use it in no time while the retractor clips in, making sure you can't leave it behind or watch it float downstream.  The perfect sidekick for the Upper Sac!
Dark Gunmetal
 
PNW Landing Nets; these nets are the bee's knees.  They are made using fish-friendly mesh that makes catch and release a much easier experience for the fish.  We have the small and the large nets, while the medium size might just end up under our tree this year ; )
 
Orvis Battenkill IV; this little real has a big voice! Great click and pawl spey reel for the $.  Works like a wonder on 11 -13 ft spey rods.
Alternate View
 
Last but probably the best gift you could give, $100 off of a full-day guided fly fishing trip with Worthington Fly Fishing.   Give your friend or loved one the chance to catch the fish of their life!
fullsizeoutput_31b
Select your trip:
 
You should be able find all of these items at your local fly shop and if they don't have them in stock they should be able to order them.  We hope this list helps you find the perfect gift.

Have a Happy Holiday!

Rogue and Klamath River Fishing Report

Feisty Rogue River Steelhead, fly fishing in October

Rogue River Fly Fishing Report

 Early November fly fishing been a continuation of late October conditions with high pressure, perfect blue skies and low and clear water. Steelhead a spread out throughout the upper and middle river with more trickling in. Most days we have seen several opportunities per person in our boats with several fish being sizable! We could use some rain, and a mix up of the high pressure would be great. We are hopeful for the storm we see in the extended forecast.

Our fly fishing guests have been enjoying the river with both nymphing and spey/swung fly tactics, finding the bite to improve over the afternoon as temperatures rise.

 

Klamath River Fly Fishing Report

Klamath River Steelhead Fly Fishing

Fly Fishing on the Klamath river has been good to great with our fly fishing guests being presented with many opportunities at adult and half pounder steelhead each day. Nymphing continues to be most productive, but then, when is it not? Colder nights have begun to drop water temps and we are beginning to find more steelhead in what I would call “traditional” steelhead water.

 Flows are near average seasonal lows and fish are responding well to egg patterns as we approach the tail end of Salmon spawning season. The fall colors are excellent, bright oranges, yellow and reds. November and December are some of our favorite months on the Klamath River.

 

 

Three reasons to fly fish the Fall in Southern Oregon

1) Fish like this

Monster Rogue River Steelhead, Fly Fishing during Fly Only

2) Fish like this

Oregon Klamath Redband Trout, Fly fishing

3) And fish like this

Rogue River Steelhead, Spey fishing